Get Up and Go! Cutters Evening Wednesday 4th September

[Mike Gilbert]

Dear Cutters, the final 2 Courses are now started at 3pm and 6pm on the Northney side.

As usual part of the Course is an evening session here at Langstone to introduce the new Course participants to the Cutters, where we are, how we operate and see the boats.

In this 6 week period, the tides are a bit awkward, so we have the Cutters evening next Wednesday 4th September. It is very early in the cycle so they will not have had much practice, and so we have changed the arrangements to make it easier for the Club members to support the Group.

High Water is around 4.15pm... so it means the 3pm course can meet at the usual time, in the Boat Park. there are 10 of them. They are aiming to be finished at 4.30/5pm. We will encourage them to stay and meet the other course people.

Then the 6pm course have been invited to come earlier at 5pm and there are 9 of them...

Can I ask for some volunteers to help meet & greet them; show them the ropes and go for a short 'open' row as we normally do? Chris Partridge and I will be there to guide them...

If you can make both that's great, but if it is only 3pm or 5pm that works as well.

Can you please post to register your willingness to help??? Mike  

[Dee]

I can help for the 3pm session

Dee

[Sue Loveridge]

I can help until 7.00pm so will have to miss the drinks!! Sue

[Claire Tomlinson]

Hi Mike
My first day back at work but should be able to get down
for 5ish.
Claire

[Liz Walmsley]

Hi Mike,  I am free on Wednesday afternoon so can be there from 3.00 for as long as needed.

[Mike Gilbert]

Thanks... all offers gratefully received... any more???

On Fri, 30 Aug 2019, 09:53 LizW [via Langstone Cutters RC], <[hidden email]> wrote:

Hi Mike,  I am free on Wednesday afternoon so can be there from 3.00 for as long as needed.

---

If you reply to this email, your message will be added to the discussion below:

http://langstone-cutters-rc.1095392.n5.nabble.com/Get-Up-and-Go-Cutters-Evening-Wednesday-4th-September-tp19939p19952.html

To start a new topic under Langstone Cutters RC, email [hidden email]
To unsubscribe from Langstone Cutters RC, click here.
NAML

[Rachel]

Hi Mike I can help

[GrahamHorwood]

I'm available for the 3pm for a couple of hours if that helps, albeit its not long since my own GU&G course! Graham

[Mike Gilbert]

Yay!!

On Sat, 31 Aug 2019, 08:43 Rachel [via Langstone Cutters RC], <[hidden email]> wrote:

Hi Mike I can help

---

If you reply to this email, your message will be added to the discussion below:

http://langstone-cutters-rc.1095392.n5.nabble.com/Get-Up-and-Go-Cutters-Evening-Wednesday-4th-September-tp19939p19970.html

To start a new topic under Langstone Cutters RC, email [hidden email]
To unsubscribe from Langstone Cutters RC, click here.
NAML

[David Etheridge]

Hi Mike I will be there. David Etheridge.

[Mike Gilbert]

Excellent... having GUAG'ers is super valuable for the new course participants....

On Sat, 31 Aug 2019, 19:42 David Etheridge [via Langstone Cutters RC], <[hidden email]> wrote:

Hi Mike I will be there. David Etheridge.

---

If you reply to this email, your message will be added to the discussion below:

http://langstone-cutters-rc.1095392.n5.nabble.com/Get-Up-and-Go-Cutters-Evening-Wednesday-4th-September-tp19939p19982.html

To start a new topic under Langstone Cutters RC, email [hidden email]
To unsubscribe from Langstone Cutters RC, click here.
NAML

[Dee]

Apologies now not available to help .
Dee

[nigel]

....but, by way of a poor consolation, I am now available. Will be now ok probably for later session.

[Vernon Seddon]

I can make the 5.00pm time if you need another pair of hands

[Mike Gilbert]

Vernon, thanks... always welcome...

On Mon, 2 Sep 2019, 12:44 Vernon Seddon [via Langstone Cutters RC], <[hidden email]> wrote:

I can make the 5.00pm time if you need another pair of hands

---

If you reply to this email, your message will be added to the discussion below:

http://langstone-cutters-rc.1095392.n5.nabble.com/Get-Up-and-Go-Cutters-Evening-Wednesday-4th-September-tp19939p20002.html

To start a new topic under Langstone Cutters RC, email [hidden email]
To unsubscribe from Langstone Cutters RC, click here.
NAML

[RichardH]

Hi Mike

As mentioned yesterday, I can be there from 3.00pm till just before 6.00pm

cheers
Richard

[Mike Gilbert]

Thanks Richard...

On Tue, 3 Sep 2019, 15:33 RichardH [via Langstone Cutters RC], <[hidden email]> wrote:

Hi Mike

As mentioned yesterday, I can be there from 3.00pm till just before 6.00pm

cheers
Richard

---

If you reply to this email, your message will be added to the discussion below:

http://langstone-cutters-rc.1095392.n5.nabble.com/Get-Up-and-Go-Cutters-Evening-Wednesday-4th-September-tp19939p20011.html

To start a new topic under Langstone Cutters RC, email [hidden email]
To unsubscribe from Langstone Cutters RC, click here.
NAML

[David Etheridge]

Apologies unwell so unable to attend.

[Mike Gilbert]

Dear Cutters, Many thanks to the Cutters who turned up to host the latest Get Up and Go! Course participants. 

We had 2 x Galleys and 2 x Teifis out to begin with and  2 x Galleys for the second session... the Attendees all enjoyed the rowing.

Over the next 4 weeks on a Wednesday we will be moving boats over for them to experience more Sculling and Galley Rowing, as well as the St Ayles and Pilot Gigs... 

 

Thanks again all, a lovely evening on the water, in spite of the wind!! 

On Tue, 3 Sep 2019 at 18:53, Mike Gilbert [via Langstone Cutters RC] <[hidden email]> wrote:

Thanks Richard...

On Tue, 3 Sep 2019, 15:33 RichardH [via Langstone Cutters RC], <[hidden email]> wrote:

Hi Mike

As mentioned yesterday, I can be there from 3.00pm till just before 6.00pm

cheers
Richard

---

If you reply to this email, your message will be added to the discussion below:

http://langstone-cutters-rc.1095392.n5.nabble.com/Get-Up-and-Go-Cutters-Evening-Wednesday-4th-September-tp19939p20011.html

To start a new topic under Langstone Cutters RC, email [hidden email]
To unsubscribe from Langstone Cutters RC, click here.
NAML

---

If you reply to this email, your message will be added to the discussion below:

http://langstone-cutters-rc.1095392.n5.nabble.com/Get-Up-and-Go-Cutters-Evening-Wednesday-4th-September-tp19939p20015.html

To start a new topic under Langstone Cutters RC, email [hidden email]
To unsubscribe from Langstone Cutters RC, click here.
NAML